Elite 500 Bloomington Cold

Elite 500 Bloomington Cold

3-BCM shown with optional solid tray slide and formica finish 
 
The Piper Elite 500 Bloomington mechanically refrigerated, extra deep well unit is listed with CSA in NSF/ANSI Standard 7. Food is recessed on rails in the pan for maximum cooling efficiency without the use of ice and is ideal as a salad bar merchandiser. Elite 500 units are compatible and will interlock with other Elite 500 units.
 
  A-5 

MODEL NUMBER

  • 2-BCM - 36" x 28" x 32"
  • 3-BCM - 36" x 28" x 46"
  • 4-BCM - 36" x 28" x 60"
  • 5-BCM - 36" x 28" x 74"
  • 6-BCM - 36" x 28" x 88"

DIMENSIONS

  • 36" height on all standard units 30" height is available on Petite Elite units
  • 28" width
  • 32" to 88" length in 14" increments
  • OPTIONAL: PIZZAZZ POWDER COATING IN LIEU OF STAINLESS STEEL

NSF/ANSI STANDARD 7
This unit is listed with CSA in NSF/ANSI Standard 7 for design and construction and has been performance tested for the storage of potentially hazardous foods. The performance test criteria is holding a food-like media at or below 41°F without any freezing for four hours at 86°F ambient temperature.

ELECTRICAL

  • 120 volts single-phase
  • Eight foot electrical cord with NEMA 5-15P plug
  • On/Off switch and pilot light mounted on control panel of unit's operator side

REFRIGERATION SYSTEM

  • 1/3 horsepower compressor
  • Fan-cooled condensing unit with an expansion valve pressure control switch
  • Refrigerant coils shall be of copper tubing wrapped around the sides of the well

STANDARD FEATURES

  • 14-gauge stainless steel top with 1-1/2" turndown on all sides
  • Top secured by four recessed bolts for easy access
  • 14-gauge stainless steel legs fastened to 18-gauge stainless steel bottom shelf
  • 20-gauge stainless steel end and front panels are attached to legs
  • 20-gauge stainless steel fully welded 9-7/16" deep well
  • Welded watertight well has concealed continuous refrigerated coil bonded to the sides and is fully insulated
  • Cold pan has a 1" drain with shut off valve located below the unit on operator's left side. Valve is 3/4" FTP.
  • Sliding doors
  • Louvered panels for ventilation of condensing unit
  • End louver panel removable to access compressor
  • 5" diameter swivel plate casters, 2 with brakes
  • Interlocking mechanism is provided to interlock with other Elite 500 units

 

Specifications

 
Model#
12x20 Pan
Capacity
(A)
Width
Height
*Amperage
120V
*NEMA
Cap No.
Ship Wt.
(lbs)
2-BCM
2
32"
28"
36"
6.3
5-15P
325
3-BCM
3
46"
28"
36"
6.3
5-15P
365
4-BCM
4
60"
28"
36"
6.3
5-15P
405
5-BCM
5
74"
28"
36"
6.3
5-15P
445
6-BCM
6
88"
28"
36"
6.3
5-15P
490
*Amperage/NEMA plug type may vary with options..

 DIMENSION ADDITIONS FOR OPTIONS
  • Add 23-3/4" to height for buffet protector guard
  • Add 14" to height for cafeteria protector guard
  • Add 22-3/4" to height for double display shelf
  • Add 8" to width for cutting board
  • Add 12-3/4" to width for solid ribbed tray slide
  • Add 12-1/2" to width for 3-bar tray slide

    Note: Line-up drawing required when ordering false front, cashier stand or interconnected units.
OPTIONS / ACCESSORIES
  • (PPC) PIZZAZZ POWDER COATING
  • (SCB) 8" stainless steel cutting board, flush with top
  • (MCB) 8" maple cutting board, flush with top
  • (SRTS) Solid 3-ribbed tray slide, 16-gauge stainless steel
  • (3BTS) 3-bar tray slide, 34" height
  • (MBS) 18" maple end bread shelf; left, right - flush with top
  • (SBS) 18" stainless steel end bread shelf; left, right - flush with top
  • (HD) Hinged doors
  • (FRMAD) Formica laminate finish with doors
  • (CPG) Cafeteria protector guard (no heat or lights)
  • (CPGL) Cafeteria protector guard with incandescent lights
  • (CPGFL) Cafeteria protector guard with fluorescent lights
  • (CEG) Cafeteria end guards, right or left
  • (CDD) Cafeteria double display (no heat or lights)
  • (CDDL) Cafeteria double display with fluorescent lights
  • (BPG1) Buffet single side protector guard (no heat or lights)
  • (BPG1IL) Buffet single side protector guard with incandescent lights
  • (BPG1FL) Buffet single side protector guard with fluorescent lights
  • (BPG) Buffet double side protector guard (no heat or lights)
  • (BPGIL) Buffet double side protector guard with incandescent lights
  • (BPGFL) Buffet double side protector guard with fluorescent lights
  • (BEG) Buffet end guards, right or left
  • (BDD) Buffet double display two-sided protector guard
  • (BPGC) Classic protector guards
  • (CDDC) Cafeteria Style Classic Double Display protector guards
  • (BPG1C) Buffet Style Classic Single Sided protector guards
  • (SCPGC) Cafeteria Style Classic Single protector guards
  • (SSL) Legs in lieu of casters
  • (DOUT) Duplex outlet (120V, 15 AMP)
  • (FB) False bottom
  • (SBT) Stainless steel salad bar template.
  • (UCR-1) Refrigerated storage base with doors and pan slides on units 60" or longer
  • (UCR-2) Refrigerated storage base with doors and pan slides on units 74" or longer

Downloads

Filename Description Date Added File Size
  2008 Spec Sheet Elite Bloomington Cold Extra Deep Cold Pan - Listed NSF/ANSI Standard 7
 06/03/2008 318.2 KB