Tray & Silverware Carts

MODELS

• MODEL 715-1-A8
• MODEL 715-1-A10
• MODEL 715-1-A12
• MODEL 715-1-A15
• MODEL 715-2-A8
• MODEL 715-2-A10
• MODEL 715-2-A12
• MODEL 715-2-A15

715 Series tray and silverware carts for silverware in cylinders.

FRAME:
The frame is constructed of all welded 1" O.D. 16 ga. stainless steel tubing formed to support an overhead silverware dispenser and to serve as push handles at both ends.

SHELVES:
The shelves are formed of 18 ga. stainless steel. All sides are turned down 1-1/4" and hemmed for rigidity. All corners are fitted with adjustable brackets to accommodate the uprights. The bottom shelf on all models is set 8" above the floor, with 10" clearance between shelves on 2 shelf models.

SILVERWARE DISPENSER:
The dispenser is constructed of all welded 18 ga. stainless steel and is securely fastened to the top of the tubular frame. The top is canted and has round openings to accommodate plastic or stainless steel silverware cylinders. (Cylinders not included).

CASTERS:
The units are mounted on four 4" diameter heavy duty, double ball bearing swivel casters with non-marking rubber tires.

MODEL 715-1-A8: The unit has one bottom shelf and openings for eight silverware cylinders.
MODEL 715-1-A10: The unit has one bottom shelf and openings for ten silverware cylinders.
MODEL 715-1-A12: The unit has one bottom shelf and openings for twelve silverware cylinders.
MODEL 715-1-A15: The unit has one bottom shelf and openings for fifteen silverware cylinders.
MODEL 715-2-A8: The unit has two shelves and openings for eight silverware cylinders.
MODEL 715-2-A10: The unit has two shelves and openings for ten silverware cylinders.
MODEL 715-2-A12: The unit has two shelves and openings for twelve silverware cylinders.
MODEL 715-2-A15: The unit has two shelves and openings for fifteen silverware cylinders.

Specifications

• 159-2701 - Silverware Cylinder, plastic (each)
• 011-3842 - Silverware Cylinder, stainless steel (each)
• 341-3483 - Napkin Dispenser, folded napkin 3-1/2" x 7"
• Y4 - Polyurethane 4" casters, set of 4, with ball bearing seals
• Y5 - Polyurethane 5" casters, set of 4, with ball bearing seals
• R - Rotating bumpers
• Q - Circular neoprene bumpers, set of 4
• I (for carts) - Silverware, identity plates, stainless steel (knives, forks, t-spoons)

CAPACITY: Up to 200 trays, 15-1/4" x 20-1/2" maximum size; 35-40 pieces of silverware in each cylinder.

OVERALL DIMENSIONS: 36" long, 21" wide, 45" high.

NOTE: Add 2-1/2" to length and width for rotating bumpers. Add 2" to length and width for circular bumpers.