Cantilever Cup, Saucer & Glass Dispensers

Model ACCA-ST mobile dispenser for cups or glasses in racks.

FRAME AND BODY:
The frame is constructed of all welded heavy gauge stainless steel and mounted on a 12 ga. stainless steel "Z" section base. The body is 20 ga. stainless steel on all sides and top, and is fitted with a stainless steel tubular push handle. The front panel is removable for adjustment access.

DISPENSING MECHANISM:
The rack carrier, constructed of all welded 16 ga. stainless steel, is raised by a series of coil springs attached to the frame. Ball bearing guides and a single stainless steel aircraft type cable keep the carrier level in all directions, even with an unbalanced load. The cable runs over pre-lubricated plated steel pulleys.

ADJUSTMENT:
Adjustment for various weights is easily accomplished by removing the front panel, then engaging or disengaging individual springs as required.

Model ACSCA-ST mobile cup and saucer dispenser.

FRAME AND BODY:
The frame is constructed of all welded heavy gauge stainless steel and mounted on a 12 ga.stainless steel Z section base. The body is 20 ga. stainless steel on all sides and top, and is fitted with a stainless steel tubular push handle. The front panel is removable for adjustment access.

CUP DISPENSING MECHANISM:
The rack carrier, constructed of all welded 16 ga. stainless steel, is raised by a series of coil springs attached to the frame. Ball bearing guides and a single stainless steel aircraft type cable keep the carrier level in all directions, even with an unbalanced load. The cable runs over pre-lubricated plated steel pulleys. Adjustment for varying weights is easily accomplished by removing the front panel, then engaging or disengaging individual springs as required.

SAUCER DISPENSERS:
The unit includes two Model AT adjustable, drop-in saucer dispensers (see Page D-9 for specifications). The saucer diameter (6-1/2" maximum) is required when ordering.

CASTERS:
The unit is mounted on four 4" diameter, heavy duty, double ball bearing casters with non-marking rubber tires.

Specifications

HEIGHT 36"- Other heights available. Shipping weight-150

HEIGHT 36"-Other heights available. Dish guides add 4" to height. Shipping weight-200

• WB - Two (2) Locking Casters
• WAB - Full Wraparound Bumpers
• Y4 - Polyurethane 4" casters, set of 4, with ball bearing seals
• Y5 - Polyurethane 5" casters, set of 4, with ball bearing seals
• 159-2701 - Silverware Cylinder, plastic (each)
• 011-3842 - Silverware Cylinder, stainless steel (each)
• 341-3483 - Napkin Dispenser, folded napkin 3-1/2" x 7"
• I (for carts) - Silverware, identity plates, stainless steel (knives, forks, t-spoons)