Cantilever Tray & Sheet Pan Dispensers

Model ATCA-ST, 2ATCA-ST or ASCA-ST cantilever style mobile tray and silverware dispensers.

FRAME AND BODY:
The frame is constructed of all welded heavy gauge stainless steel and mounted on a 12 ga. stainless steel "Z" section base. The body is 20 ga. stainless steel on all sides and top, and is fitted with a stainless steel tubular push handle. Model 2ATCA-ST is constructed similarly to Model ATCA-ST except that it consists of a double size frame and body mounted on a single "Z" section base, and has two independent tray carriers and dispensing mechanisms to accommodate two stacks of trays. Model ASCA-ST has stainless steel stops at the front of the carrier to allow it to handle extremely heavy loads. The front panel is removable for adjustment access.

DISPENSING MECHANISM:
The tray and pan carriers (two on Model 2ATCA-ST), constructed of all welded 16 ga. stainless steel, are each raised by a series of coil springs attached to the frame. Ball bearing guides and a single stainless steel aircraft type cable keep each carrier level in all directions, even with an unbalanced load. The cable runs over pre-lubricated plated steel pulleys.

ADJUSTMENT:
Adjustment for various tray or pan weights is easily accomplished by removing the front panel, then engaging or disengaging individual springs as required.

CASTERS:
Each unit is mounted on four 4" diameter, heavy duty, double ball bearing casters with non-marking rubber tires.

Specifications

Shipping weight ATCA-ST-150 Shipping weight 2ATCA-ST-280 HEIGHT 36" - Other heights available. Shipping weight ASCA-ST-170

• WB - Two locking casters
• WAB - Full wraparound bumpers
• Y4 - Polyurethane 4" casters, set of 4, with ball bearing seals
• Y5 - Polyurethane 5" casters, set of 4, with ball bearing seals
• 341-3483 - Napkin Dispenser, folded napkin 3-1/2" x 7"
• I (for carts) - Silverware, identity plates, stainless steel (knives, forks, t-spoons)